BRIDGING THE GAP
WITH up to 64 PROCESS
ENGINES.
BUILT-IN ENGINES,
LumiCore, now available with 64, 32 or 16 engines, allows you to merge and route up to 64 x 4 input sources toward 64 newly defined universes. This way, LumiCore becomes the ideal solution to isolate your control setup on a festival, a theater or in a TV studio.
As technology is evolving towards full networked solutions (ArtNet or sACN directly to the fixtures), LumiCore provides all the flexibility of the LumiNode but then directly on the network, with up to 256 input universes merged and routed towards max 128 output universes. All of this with extreme low latency.
MERGE IN HTP, LTP, BACKUP,
SWITCH, CROSSFADE OR
CUSTOM MODE
The engine technology allows you to merge in HTP, LTP, Backup, Switch, Crossfade or custom mode, with different triggers that can be assigned even on a per channel basis.
In large pixel mapping applications LumiCore is the ideal bridge to merge different control sources into new network streams.
In TV studio’s LumiCore will
allow you to have control desks in
the IT environment.
With its split interface possibilities LumiCore allows you to isolate
your lighting rig LAN from the IT infrastructure. This allows you
to monitor your control infrastructure from the IT department
and to centralize show storage on IT side meanwhile sharing
these resources over several studios. LumiCore acts as a real
bridge and can be deployed in a fully redundant way.
Specifications
- Connectivity
- DMX features
- Network features
- Key features
- Status
- Power
- Environmental
- Physical
- Approvals
- Product codes
- DMX protocols: NA
- DMX port direction: NA
- DMX port isolation: NA
- DMX timing: NA
- Ethernet protocols: Art-Net™ (1-4), sACN ANSI E1.31, RTTrPL (BlackTraX), KiNET v1,v2
- Ethernet port speed: 1Gbps
- Port sensing: Auto-negociation, MDI / MDIX
- Split management interface: Yes
- Groups (VLAN) support: Yes
- Process engines: 64 (LumiCore 64), 32 (LumiCore 32), 16 (LumiCore16)
- Merging engine:
- HTP
- LTP
- Backup
- Switch
- X-Fade
- Custom
- Softpatch: Yes
- Master/Limit:
- Proportional
- Limit
- Trigger system: Yes
- ReRoute: Yes
- Profile manager: Yes
- Snapshot: Yes
- DMX Redundancy: NA
- Monitoring software: LumiNet Monitor V2 (free)
- Configuration: Through the built-in web server or with the front end display menu
- Display and jog: Yes
- Status LEDs: Ethernet Port link/activity LED and mode LED
- Power input:
- 100-240VAC 50-60Hz
- PoE (802.3af)
- Power consumption: Maximum 13W
- Power redundancy: Yes
- Operating temperature: 0 to +50°C
- Storage temperature: -10 to +70°C
- Humidity (non condensing): 5 to 95% RH
- Enclosure: Robust metal housing
- Mounting: Rack, Truss
- Dimensions (W x D x H): 220 x 175 x 44 mm (1/2 19" x 8,7" x 1,7")
- Weight: 2,4 kg
- Packaging: 530 x 330 x 80 mm (21" x 13" x 3,15")
- Electromagnetic emissions and immunity:
- EN55032 class A
- EN55035
- EN61000-3-2
- EN61000-3-3
- EN61000-4-2
- EN61000-4-4
- EN61000-4-5
- EN61000-4-6
- EN61000-4-8
- EN61000-4-11
- FCC Part 15 CFR 47 class A
- ICES-003 Issue 6
- Safety:
- IEC 62368-1
- EN 62368-1
- UL 62368-1
- CAN/CSA-C22.2 No. 62368-1
- CE
- Certificates:
- cSGSus Mark
- CE
- CB certificate
- Green:
- RoHS
- REACH
- Product codes:
- LU 01 00074-64 LumiCore 64
- LU 01 00074-32 LumiCore 32
- LU 01 00074-16 LumiCore 16
*Note: Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice. Specifications are subject to change without notice.
Found the product that is going to make your job a lot easier?
Discover our worldwide network of distributors and resellers or contact sales@luminex.be!